CHAMELEON

 LASERS

PM27 DMX Laser System

·      Plug and Play Laser with built in DMX control
·      Available as 200mW Green DPSS lasers 532nm
·      16 MegaBit Flash memory for image storage
·      Link for PC update of Image
·      512 images or animations
·      Supplied with software to download ILDA images
·      Supports scrolling text with external PC keyboard
·      Can be used on its own with audio trigger
·      Small size, low weight.
·      Option for remote image and text update from controller
·      Universal mains input
·      No cooling required


The PM27 is a self contained laser system consisting of a 200 mWatt green solid state laser with full blanking, scanning system and built in controller. It can be supplied to special order in red and blue versions. The unit can work in 4 modes,

1/.
As a DMX controlled laser system with all functions controlled from a remote DMX desk. The start address can be set to fit in with any existing DMX lighting system. An option is available to allow the text and the images to be remotely updated from the DMX desk; this needs a desk that will support this feature.

2/.
Can be controlled from a PC keyboard. This allows full control of the unit with up to 8 banks of 32 effects to be programmed and held in non-volatile memory.

3/.
As a stand alone system that will sequence thru its images at random in response to an audio signal with the built in microphone. The images are also modulated at random to create a non repeating laser display.

4/.
As a unit that will display scrolling text and sequence thru its list of text messages. This is ideal for use in advertising or shop window displays. The text can be programmed by plugging a PC keyboard into the unit.



The PM27 is compact, requires no cooling and built to heavy duty requirements. The optical system is completely sealed and requires no maintenance.


When used in DMX mode the following functions can be controlled.

DMX Channel assignment:
1 X position
2 Y position
3 X size
4 Y size
5 Modulation position or rate
6 Modulation effect
7 Image bank
8 Image select
9 Dimmer
10 Rove Pattern
11 X Rove size
12 Y rove size
13 Rove Speed
14 Servo output to 4 position servo wheel ( if fitted)
15 Repeat, determines the number of times a frame is repeated controlling the playback time of animations.


Personalities are on the supplied CD for Avo - Peal and Flying Pig Sytems - Hog 2 lighting desks. Also included on the supplied CD is the software to download ILDA files into the PM27. Demo versions of ILDA viewing and editing software is also included.

Specifications

Size 240 x 310 x 150 mm without yoke fitted
weight 2.5 Kgms
Max. output power 200 mWatt
Mains voltage 110 - 240 V AC
Input power Max 150 Watts

Max. operating Temp 40 degrees C
Min. Operating Temp 5 degrees C
Warm up time 5 Mins to full power
Beam Diameter 2MM at source
Divergence 1 mrad worst case
Wavelength 532nm


PC Interface Standard RS232
DMX Interface Standard DMX 512
Audio internal auto level microphone
Memory 16 MegBits Reprogrammable flash memory
Scanners Built in high speed scanners

Controls
DMX mode switches
X,Y size for stand alone operation
Mains On off

Indicators
Power On
DMX Ok

Connectors
Mains input IEC
DMX 5 pin in and link out XLR's
RS232 9 min D Series socket
Keyboard 6 Pin Mini DIN PC compatible

 

Need an urgent order? We offer OVERNIGHT DELIVERY within Europe on in-stock items if ordered by 1300Hrs.